Std |
Compression Couplings Morris TypeBolted couplings are available in both heavy wall pipe size and tube size up to 24″Ø. Installation requires only a 3/4″ wrench or deep socket. Offers easy teardown and reusability. Models available in 3, 4, 5, and 6+ bolt configurations to safely accommodate heavy wall installations. Galvanized with plated hardware standard. All stainless available. Various gaskets available. white nitrile, red rubber, silicone, EPDM, viton and food grade.. |
||
Common Name | Part No. for O.D. Tubing | Part No. for I.D. Pipe | Pipe (o.d.) |
---|---|---|---|
1 1/2 | A 15 | B 150 | 1.90 |
13/4 | A175 | . | |
2 | A 2 | B 200 | 2.38 |
2 1/8 | A2125 | . | |
2 1/2 | A 25 | B 25 | 2.875 |
3 | A 3 | B 3 | 3.500 |
3 1/2 | A 35 | B 35 | 4.000 |
4 | A 4 | B 4 | 4.500 |
4 1/2 | A45 | . | |
5 | A 5 | B 5 | 5.563 |
6 | A 6 | B 6 | 6.625 |
8 | A 8 | B B | 8.625 |
10 | A 10 | B 10 | 10.75 |
12 | A 12 | B 12 | 12.75 |
14 | A 14 | B 14 | 14.00 |
Std black neoprene |
Quick CouplingsQuick couplings are available in 4″ and 9-1/2″ lengths for pipe from 1″Ø to 12″Ø and tubing 1-1/2″Ø to 12″Ø. Tighten is seconds. 100% stainless steel. Various gasket types available. white nitrile,red rubber, silicone, EPDM, viton and food grade.. grade |
||
Common Name Tube/Pipe Size | Part No. for O.D. Tubing | Part No. for I.D. Pipe | Pipe (o.d.) |
---|---|---|---|
4″ LONG COUPLINGS, 1 CLAMP (FOR FDA ADD (-FDA) TO END OF PART NUMBER |
|||
1 1/4 | SG-16601 | 1.656 | |
1 1/2 | SG-15501 | SG-19001 | 1.90 |
1 3/4 | SG-17501 | . | . |
2 | SG-20001 | SG-23751 | 23/8 |
2 1/8 | SG-21251 | . | . |
2 1/2 | SG-25001 | SG-28751 | 2.875 |
3 | SG-30001 | SG-35001 | 3.500 |
3 1/2 | SG-35001 | SG-40001 | 4.000 |
4 | SG-40001 | SG-45001 | 4 1/2 |
4 1/2 | SG-45001 | . | . |
5 | SG-50001 | SG-55631 | 5.563 |
6 | SG-60001 | SG-66251 | 6.625 |
8 | SG-80001 | SG-86251 | 8.625 |
10 | SG-10001 | SG-107501 | 10.75 |
12 | SG- 120001 | SG-127501 | 12.75 |
9-1/2″ LONG COUPLINGS, 2 CLAMPS (FOR FDA ADD (-FDA) TO END OF PART NUMBER |
|||
1 1/4 | 1.656 | ||
1 1/2 | 1.900 | ||
1 3/4 | . | ||
2 | 23/8 | ||
2 1/8 | . | ||
2 1/2 | 2.875 | ||
3 | 3.500 | ||
3 1/2 | SG-40002 | 4.000 | |
4 | SG-40002 | SG-45002 | 4.500 |
4 1/2 | SG-45002 | . | . |
5 | SG-50002 | 5.563 | |
6 | SG-60002 | SG-66252 | 6.625 |
8 | SG-80002 | SG-86252 | 8.625 |
10 | SG-10002 | SG-107502 | 10.75 |
12 | SG- 120002 | SG-127502 | 12.75 |
Remember, slip couplings require TWO shrink sleeves to seal… |
Shrink Sleeves for light Wall SystemsA heat shrinkable polyolefin band that shrinks when heated with a heat gun and wraps around the connection. The resulting joint is mechanically strong and is vacuum tight! A great product. Recommended for use in systems under 15 psi. NOTE: Based on our experience. Shrink sleeves are the least expensive method of joining light wall tubing. Use shrink sleeves with expanded end fittings for 4″Ø and less, and compression couplings with straight ends on larger sizes. |
Part Number Shrink Sleeve | For O.D. Tubing |
---|---|
SS-212 | 2-2-1/8″ |
SS-300 | 2-1/2 – 3″ |
SS-350 | 3-1/2″ |
SS-400 | 4″ |
SS-500 | 5″ |
SS-600 | 6″ |
SS-800 | 8″ |
SS-1000 | 10″ |
SS-1200 | 12″ |
|
Slip couplings for light Wall SystemsAvailable in:Carbon Steel, Galvanized Steel, Aluminum 6061, 304 SS Used to join any two straight ends of tube or pipe. Available with expanded ends only up to 6″. NOTE: Compression couplings replace slip couplings. Slip couplings are required for joining tube ends. |
|||
Size | E – i.d | Gauge | ||
---|---|---|---|---|
SC-213 | 2.12 | 3 | 2.1 | 16 |
SC-253 | 2 1/2 | 31/2 | 2 1/2 | 16 |
SC-303 | 3 | 4 | 3 | 16 |
SC-353 | 31/2 | 4 1/2 | 3 1/2 | 16 |
SC-403 | 4 | 5 | 4 | 16 |
SC-503 | 5 | 6 | 5 | 14 |
SC-603 | 6 | 7 | 6 | 14 |
SC-803 | 8 | 8 | 8 | 14 |
SC-1003 | 10 | 10 | 10 | 12 |
SC-1203 | 12 | 12 | 12 | 12 |
SC-1403 | 14 | 14 | 14 | 12 |